Passive Infrared Effective Ultrasonic Animal Chaser

Passive infrared effective ultrasonic animal chaser
Patent Number: ZL. 2012 30300821.9

The solar animal repeller is an effective way to help rid your garden of univited animal visitors. It combines a sophisited PIR detection system that detects movement and triggers short bursts of powerful Ulstrasonic sound waves and Flashing strobe lights.

Specofocations:
1). Power Supply: 3 x AA batteries
2). Effective distance: Till max 8m (depending on weather and surroundings)
3). Detecting angel: 110° Horizontal (depending on weather andsurroundings)
4). Fully waterproof.

Installing the batteries:
This device has a built-in solar panel which keeps the battery charged.
Place the batteries (Provided) in their compartment at the back of the unit. Make sure of
The polarity.
It is advisable, before installing the batteries, check whether they are properly charged.
Close the battery compartment with 4 screws provided.
The device has built-in low-battery detection and warning, if meet the rainy day
Continuously, the batteries do not have enough power, the low battery LED will flashing,
Then customers can use USB line connect DC socket(refer to photo) to charge the
Batteries(you can also connect adaptor to charge), also the device has over charge
Protection, it can protect batteries during over charging.

Operation:
- A strong ultrasonic signal frighten animals. The animals avoid the area because of its
Unpleasant ultrasonic sound. The sound is activated when an animal enters the range.
Thus, animals can not get used to the sound, and the repulsive effect is stronger.
- A strong flashing scared animals. The strong flashing is activated when an animal enters
The range, then the animals will be scared and give back.

Where to place the device:
1. Install the pest animal repeller to the desired location, in such way the device faces the
Ground to protect. Fix the spike stake on the unit, Plant the unit into the ground at the
Place that seems more favorable.
2. The back of device has the hang hole, you can hang up the device to the place that you
Want frighten animals.

Settings:
- Button "SENS" (Left): Is for adjusting sensitivity and distance. By turning the knob
Clockwise, you increase the range of protection. To repel small animals, turn the knob up
To the right.
- Button "FREQ" (Right): Frequency control. By turning the knob clockwise, you increase
The frequency.
Button "FREQ" Position:
- 1: 13.5kHz-17.5kHz Repels animals such as mice, small rodents, ...
- 2: 15.5kHz-19.5kHz Repels animals such as large dogs, foxes...
- 3: 19.5kHz-23.5kHz Repels animals such as small dogs, cat, bird...
- 4: Strong flashing
- 5: All function working, sweep frequency from mode 1 -- mode 2 -- mode 3, and turn on
Strong flashing

Warning:
The base of the top shall be exposed to the outside, according to the terrain varies ensure
The water does not exceed the waterproof safety line (note illustration).