Ultrasonic Liquid Level Measument, with LED Display
- Payment Type:
- L/C, T/T, Paypal, Money Gram, Western Union
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | Guangdong, Shenzhen |
|---|---|
| Payment Type: | L/C, T/T, Paypal, Money Gram, Western Union |
Product Description
Product Description
50 KHZ 5m Intergrated Ultrasonic Liquid Level Meter, With 4 digitals LED or LCD Display
Introduction
Ultrasonic Level Meter is a continuous non-contact measurement and
Monitoring device. The device is mounted on the top of the tank and generates an electric signal that is
Converted by the sensor to ultrasonic pulses and transmitted through air space, these pulses hits the liquid surface and reflects back to the sensor, the device receive these echoes and calculates the level in the tank.
Features
Easy to install
Small installation space(50-60mm for hole)
High accuracy
Different measurement range
Small blind area(if the device Customized for specific environment the minimum dead zone can be less
Than30mm)
Various outputs: RS232/RS485
Resistant to moisture, dust, high temperature, etchant gas and
Other bad environment (can be used indoor and outdoor)
Requires less maintenance
No pollution
Parameters
Measure Range: 1m 2m 3m 5m 6m 8m (Based on the corresponding
Area of the smooth surface targets and zero airflow environment)
Operating Voltage: 12V DC, 24V DC OR wide voltage 10~36V DC
Operating temperature: -10~ 60º C (default)
-20~70º C, -40~80º C (Customize)
Operating humidity: ≤ 90% (non-condensing)
Default: ≤ 80% RH (non-condensing)
Dead Zone: ≤ 30~ 300mm( at 25º C)
Accuracy: 0.3 ~0.5 %F or ± 3mm(at 25 º C)
Frequency: 15kHz~200kHz (Different according to different models)
Pressure: 0.1MPa (Can be customized)
Beam Angle: 15, 12, 9, 6 (Different according to different Transducer)
Output: 1). Voltage: 0 ~5V or 1~5V
2). Current: 0 ~20mA or 4~20mA
3). ON/OFF signals: 1 ~4kinds
4). RS485, RS232
Choose one of the output above, before buy it, if you want more than 1output, it can be customized
Default output: 4~20mA or RS485
Working Humidity: ≤ 80%RH non-condensing
Storage Temperature: - 40º C ~8 5º C;
Storage Humidity: ≤ 70%RH non-condensing
Detection way: Continuous 0.1 ~20Hz/s (default is 1Hz/s )
Size of Transducer: Φ 50~78mm(Different Transducer different measure range)
Introduction
Ultrasonic Level Meter is a continuous non-contact measurement and
Monitoring device. The device is mounted on the top of the tank and generates an electric signal that is
Converted by the sensor to ultrasonic pulses and transmitted through air space, these pulses hits the liquid surface and reflects back to the sensor, the device receive these echoes and calculates the level in the tank.
Features
Easy to install
Small installation space(50-60mm for hole)
High accuracy
Different measurement range
Small blind area(if the device Customized for specific environment the minimum dead zone can be less
Than30mm)
Various outputs: RS232/RS485
Resistant to moisture, dust, high temperature, etchant gas and
Other bad environment (can be used indoor and outdoor)
Requires less maintenance
No pollution
Parameters
Measure Range: 1m 2m 3m 5m 6m 8m (Based on the corresponding
Area of the smooth surface targets and zero airflow environment)
Operating Voltage: 12V DC, 24V DC OR wide voltage 10~36V DC
Operating temperature: -10~ 60º C (default)
-20~70º C, -40~80º C (Customize)
Operating humidity: ≤ 90% (non-condensing)
Default: ≤ 80% RH (non-condensing)
Dead Zone: ≤ 30~ 300mm( at 25º C)
Accuracy: 0.3 ~0.5 %F or ± 3mm(at 25 º C)
Frequency: 15kHz~200kHz (Different according to different models)
Pressure: 0.1MPa (Can be customized)
Beam Angle: 15, 12, 9, 6 (Different according to different Transducer)
Output: 1). Voltage: 0 ~5V or 1~5V
2). Current: 0 ~20mA or 4~20mA
3). ON/OFF signals: 1 ~4kinds
4). RS485, RS232
Choose one of the output above, before buy it, if you want more than 1output, it can be customized
Default output: 4~20mA or RS485
Working Humidity: ≤ 80%RH non-condensing
Storage Temperature: - 40º C ~8 5º C;
Storage Humidity: ≤ 70%RH non-condensing
Detection way: Continuous 0.1 ~20Hz/s (default is 1Hz/s )
Size of Transducer: Φ 50~78mm(Different Transducer different measure range)
Related Keywords
Related Keywords
