Multifunctional CCTV Tester with Multimeter and Test Optical Fiber Function Rx-K698p

Multifunctional CCTV Tester with Multimeter and Test Optical Fiber function RX-K698P

* English OSD Menu, support multiple languages, User friendly
* Digital multimeter function test the current, voltage, resistance, on-off, diode and capacitance. (Only for 5th generation CCTV Tester)
* High precision, high stability optical power meter to test the power value of optical fiber transmission and attenuation degree of fiber link transmission. (Only for 5th generation CCTV Tester)
* Multi-protocol color barcode generator (Only for 5th generation CCTV Tester
* Address search function, convenient for the user to find the PTZ ID
* Built-in High quality, large capacity lithiumbatterybattery, support 8 hours.
* PELCO P/D and kinds of protocols, special protocol could be customized
* DC12V/1A output for camera
* Audio test
* Practical standby function for saving power, and 1-10 min can be set for the standby time.
* Battery display and monitor the battery remaining power at any time.
* Adopt RS485 communication, baud rate: 1200\2400\4800\9600\19200 are optional. The tester is not only for site installation test and also worked as a keyboard for remote using.
* 3.5 inch LTPS LCD Screen to video test and auto detected NTSC/PAL video signal mode.
* Visualization wiring intelligent testing, and show the wires connection and order.
* RS485 Data test, it can test the RS485 Data sent from control device, display the hexadecimal data content for engineer to analyze.
Model GA-K698P
Signal Mode PAL/NTSC automatically suitable
Display 3.5 inch LTPS LCD screen, 960x240 resolution
Video Input/Output 1 Channel BNC; 1 Channel BNC
PTZ Protocol PELCO P/D and kinds of protocols, special protocol could be customized
Audio Test Output 1 channel audio signal, test the sound whether in normal
UTP Cable Test Test UTP Cable connection state and display on the screen.
RS485 Data Test Test the RS485 data sent from control device.
Power Adapter DC9V/2A
Battery 1600mAH
AC/DC Voltage 0~300V
AC/DC Current 400.0uA\4000uA\40.00mA\400.0mA\10A
Resistance 400.0Ω\4.000K\40.00K\400.0K\4.000M\40.00M
Capacitance 4.000nF-400.0uF
Diode forward voltage: 0~2V Min resolution: 1mV
ON-OFF Test Test Speed 3 seconds at a time
Type K698P-A (Standard) K698P-B (Optional)
Calibrated Wavelength 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm
Range (dBm) -70~ +10dBm -50~ +26dBm
Port FC/PC SC, ST Optional
DB-rel D-Value from the initial value, for the loss measurement
Hold Display Hold the current value for convenience
Dimension 105*44*188 mm