
Electronic Cigarettes Atomizer 5
- Payment Type:
- T/T
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | Shenzhen City China |
---|---|
Payment Type: | T/T |
Product Description
Product Description
Product main body has three buttons above, A display, A smoke key A, A regulation and key B, all the functionality of A regulating minus key C products through A/B/C three key combination to inspire, and displayed on the screen corresponding content:
1. Electricity: When install batteries, after processing circuit, red yellow green LED light cycle flashing once, digital tube display, 888, and then according to the last set parameters, enter the shutdown state.
2. Boot: A rapid buttons, 3 times, red, yellow, green LED display in turn after A time, digital tube display on two seconds into the boot.
3. The output mode switch: On, smoking at the same time hold down the key regulation and A key C 3 seconds, the digital tube display Uo, into voltage output mode. Referred to as "A + C = Uo; On, smoking at the same time hold down the button A and adjust key B 3 seconds, the digital tube display Po, into the power output mode. Referred to as "A + B = Po.
4. Adjust the unlock: Switch on, at the same time hold the adjust key B and C5 seconds to complete the switch. Digital tube display LOC enter a state of lock, press the control key is not adjusted. Digital tube display output state, at this point, press the control key can adjust the output.
5. The battery voltage query: Hold down the adjust key B or C two seconds, digital tube display the battery voltage.
6. Query: Atomizer resistance on, at the same time hold the adjust key B and adjust key C two seconds, digital tube display atomizer resistance, 0 ~ 9.9, shows that NON when no load
7. To turn it off: Quickly push A three times.
1. Electricity: When install batteries, after processing circuit, red yellow green LED light cycle flashing once, digital tube display, 888, and then according to the last set parameters, enter the shutdown state.
2. Boot: A rapid buttons, 3 times, red, yellow, green LED display in turn after A time, digital tube display on two seconds into the boot.
3. The output mode switch: On, smoking at the same time hold down the key regulation and A key C 3 seconds, the digital tube display Uo, into voltage output mode. Referred to as "A + C = Uo; On, smoking at the same time hold down the button A and adjust key B 3 seconds, the digital tube display Po, into the power output mode. Referred to as "A + B = Po.
4. Adjust the unlock: Switch on, at the same time hold the adjust key B and C5 seconds to complete the switch. Digital tube display LOC enter a state of lock, press the control key is not adjusted. Digital tube display output state, at this point, press the control key can adjust the output.
5. The battery voltage query: Hold down the adjust key B or C two seconds, digital tube display the battery voltage.
6. Query: Atomizer resistance on, at the same time hold the adjust key B and adjust key C two seconds, digital tube display atomizer resistance, 0 ~ 9.9, shows that NON when no load
7. To turn it off: Quickly push A three times.
Related Keywords
Related Keywords