HVA Ceramic Resistor

Introduction:

Ⅰ KHX`s HVA Resistor series are primarily designed for high voltage,high energy

and high current products.

Ⅱ HVA`s function is much better than carbon composition resistor, in some fileds,

several carbon composition resistors can be replaced by only one ceramic resistor.

Ⅲ Operating ambient temperature:-55℃~200℃.

Ⅳ Resistance value:3Ω~10MΩ.

Ⅴ Tolerance:K(±10%),M(±20%) are recommended, F(±1%),G(±2%),J(±5%) are available.

Ⅵ For customerized products please contact with us.

Features:

Ⅰ Special ceramic resistor , was made of Clay , Silicon dioxide and Porcelain cement ,After

sintering under high temperature and high voltage , the resistor core was build ,then take

the insulation coating.

Ⅱ Saver than the wire-wound resistor and film resistor , which will avoid the wire disconnecting

and the film breaking up .

Ⅲ High peak power can be reached at 5KW-30KW in short time.

Ⅳ Good performance in bearing high voltage and high current.

Ⅴ Products meet the RoHS requirments.

Applications

Ⅰ Radar,Motor Drives, Broadcast Transmitters.

Ⅱ X-Ray equipment ,Lasers,Medical Defibrillators.

Ⅲ Dynamic Braking, Soft-start/Current-limit equipment.

Ⅳ Snubber Circuits, Dummy Loads, Energy Research field..

Ⅴ RF Amplifiers,Semiconductor Process,Power Conditioning.