JA201# Polyurethane Resin

Contact: April

hyjzsg (at) szrl (dot) net

6.98~12.98usd/kg

Description

JA201# polyurethane resin is a polymer material developed material, room temperature curing, two-component, with low viscosity, small odor, soft, transparent glue. For it`s good advantages of Wear resistance, yellowing resistance, UV resistance and never hardens,it is widely used for outdoor application.

Application

1)Used in aviation, railways, construction, sports and other aspects;

2)Surface varnish for wooden furniture and metal;

3)Insulation for storage tanks, pipes, cold storage, beer, fermentation tanks, cold preservation barrels

4)Waterproof for building insulation

5)Used for prefabricated polyurethane sheet

6)For the products making of plastic products, wear-resistant synthetic rubber, synthetic fibers, hard and soft foam products

7) For adhesives and coatings;such as for :all types of wood, chemical equipment, telecommunications equipment and instrumentation and surface finishing of various means of transport, toys, handicrafts, hand model, gifts, etc.

Characteristics

*Good radiation resistance , yellow resistance and good hardness, it is very suitable for outdoor products

*Good resistant of UV and aging

*Non change hardness, not easy broken, no shrinkage and non deformation ,and good adhensive ,and good sunshine resistance for the long time using

*Low viscosity, and good leveling

Operation instructions

1, Operated under the conditions of ventilation environment.

2, prepare the tools , and make sure it is clean ,dry . Un-oil ,and not contact with any chemical Solvent

3, Weigh part A and part B exactly ( multi-component part A will leads to the bottom of the bubble, multi-component B may cause surface sticky).

4 Carefully stir in the same direction to avoid a large number of bubbles, you need patience and stir until completely transparent.

5, Vacuum Pumping : Vacuum pumping by vacuum machine

Warm tips :

1 The humidity should less than 60% if using by hand , you would better to use a dehumidifier

2 You would better to use metal or plastic tools instead of wooden articles .

3 You should make sure your products is very dry , and can not use inks containing glycerol.

4 This product (especially B glue) can`t contact with skin , otherwise please wash with plenty of water and soap

5 Resin will be cured with High temperature and cured very fast

6 Far away from children to prevent eating.

Package

2KG/Set or 10KG/set packing

Shelf life

Six (6) months when stored under dry and cool place by original package under 25℃