liquid silicone injection molding for baby nipples

Specifications of liquid silicone injection molding for baby nipples  

liquid silicone injection molding for baby nipples is suitable for injecting molding technique with high transparency, strength, and tear strength.

Typical Properties of liquid silicone injection molding for baby nipples

1.High transparency
2.Excellent tear strength(≥35KN/m)
3.Good resilience
4.Good heat stability and weather ability ( temperature resistant range of -60°C--250°C)
5.Anti-yellowing
6.Heat-ageing resistance
7.Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.

Standard Datasheet of liquid silicone injection molding for baby nipples :

Operations for liquid silicone injection molding for baby nipples :

After the component A and component B are mixed under the temperature of 20 °C, the effective operating time is 5 days in sealing status, The effective operating time will shorten in case of rising temperature.
Instruction: Typical data can not be directly used for actual production guidance. Please contact us for details.
Package: The general packages of HY-92XA/B series are in 20kg and 200kg per barrel. 
Other applications: The series of products can also be used for producing other food grade silicone rubber products.

SHELF LIFE of liquid silicone injection molding: 

8-10 months when stored under 24°C in original unopened packages.

PACKAGE of liquid silicone injection molding: 

Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.