prices liquid silicone rubber for stone veneer molds

FEATURES:

Two-parts, flowable liquid silicon & curing agent.

Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.

Good tensile strength and tear strength,low shrinkage.

 It gets cured at room temperature 25 ⁰C within 5-7 hours.

An exceptional fluidity and good operability, easy to be demolded.

Suitable for pouring methods of operation for small sized molds making.

OPERRATING INSTRUCTION:

1.Stir part A and part B with right mixing ratio

evenly. And get the mixture for vacuum-

pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE:

Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.

Frequent Asked Questions

Why does the silicone mold get burnt out?

This consequence happens only because you have left out the important notes when using unsaturated 

resin materials to produce your products. The unsaturated resin produces great heat when added the 

curing agent. So you must demould the product within 3 minutes to avoid this problem.