addition silicon liquid for cement garden decoration molds

addition silicon liquid for cement garden decoration molds

Description of addition silicon liquid for cement garden decoration molds

HY- E series addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications of addition silicon liquid for cement garden decoration molds

HY- E series addition molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making, prototyping etc.

Characteristics of addition silicon liquid for cement garden decoration molds

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of addition silicon liquid for cement garden decoration molds

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.) 

OPERRATING INSTRUCTION for addition silicon liquid for cement garden decoration molds: 

1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2.Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4.Pour the mixture with correct mixing ratio into the model frame. 

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished 

addition cured silicone mold .

Frequently asked questions:

Why is the silicon mold oily? 
The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.

SHELF LIFE of addition silicon liquid for cement garden decoration molds:  

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE of addition silicon liquid for cement garden decoration molds:

Packed in clean 25kg/pail,  200kg/pail.

Any more information abt addition silicon liquid for cement garden decoration molds, pls feel free to contact Ms. Bella:

Mobile:0086-18938867572

Tel: 0086-755-892948006

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email:hysi(at)szrl(dot)net

Skype: bellajiaqi

Any questions, please fell free to contact ----- Shen Zhen Hong Ye Jie Technology Co., Ltd

Sales Manager Mr. Tony

Trade Manager: cn208206000       

WhatsApp : 0086 18938867516

Office No : 0086-755-89948006  

Email: hyi(at)szrl(dot)net                   

Skype : kimberly_802