RTV-2 Addition cure silicone rubber for animal statue,molding silicone

Application

RTV-2 Addition cure silicone rubber for animal statue is suitable for the molding for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.some of the materials you can cast into a silicone mold are: Urethane Plastic,Urethane Rubber,Epoxy,Polyester,Fiberglass Resign,Plaster,Soap,Wax,Low melt metals (up to 400 degrees Max),HydroCal White,UltraCal 30,Rigid Foam,concrete statue mold.

Feature 

RTV-2 Addition cure silicone rubber for animal statue is generally named two-components siliconerubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application. 

Picture 

Datasheet 

Operation 

1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame.

Frequent asked question 

what should you do for imcomplete curing after the mold is finished?

Two causes lead to this problem:

a. Inexact mixing ratio, not to weigh following the standard ;
b. The mixture of the silicone and catalyst is not mixed evenly.
You should avoid this kind of problem ,otherwise there will be a waste of silicone mold.

Certification 

ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8

Package

Need any help on silicone rubber, please feel free to contact Ms Kitty:

Tel:86-755-89212369
Mob:86-18938867593
E-mail: hyjz(at)szrl(dot)net  
Skype:kity-467707861

You can also send me e-mail by scanning 2 Dimensional Bar Code below: