cement buddha moulding platinum silicone rubber

cement buddha moulding platinum silicone rubber 

Description of moulding platinum silicone rubber

HY- E series platinum molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications of moulding platinum silicone rubber

HY- E series platinum molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making, prototyping etc.

Characteristics of moulding platinum silicone rubber

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated

considerably by the application of heat

Technical Parameters of moulding platinum silicone rubber  

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.) 

OPERRATING INSTRUCTION for moulding platinum silicone rubber: 

1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2.Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4.Pour the mixture with correct mixing ratio into the model frame. 

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished 

addition cured silicone mold .

Why does the silicone mold get burnt out?

This consequence happens only because you have left out the important notes when using unsaturated resin materials to produce your products. The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.

 SHELF LIFE of moulding platinum silicone rubber:  

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE of moulding platinum silicone rubber:

Packed in clean 25kg/pail,  200kg/pail.

 For more information, please fell free to ask Mr. Tony 

Tel:86-755-89948006
Mob:86-18938867516
e-mail: hyi(at)szrl(dot)net
Skype: kimberly_802