silicone rubber for sugar mold making,food grade silicone

feature:

silicone rubber for sugar mold making,food grade silicone has very fine detail When colored, sprayed or painted it will appear to be real!This addtion cured silicone bears FDA certificate, All the Silicone Rubber Molds are approved for food contact.can be used for chocolate, sugar, marzipan and many more food related uses.Rubber Molds made of addtion cured silicone will withstand heat up to 150 C° and can be frozen up to -20 C°.silicone rubber for chocolate mold making,food grade silicone is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

application:

silicone rubber for sugar mold making,food grade silicone will reproduce the finest detail and is suitable for a variety of industrial and art related applications including prototypes, furniture, sculpture and architectural elements.silicone for soap making can also be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins.

advantage:

A.Good operability and fluidity         

B.Excellent tear strength and tensile strength.

C.Excellent flexibility and it’s easy to removal of.

D.High temperature resistance    

E.High duplication times and repeated use 

F.Lower shrinkage rate

picture show:

datasheet: 

operation way:

If the customer wants to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision  patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If moulds requiring fast drying and demould, more curing agent is needed; contrarily, if moulds requiring slower drying and demould, less curing agent is needed.Our curing agent is free charged.
(Note: our company does not recommend you to add silicone oil. If a special soft silicone mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.)

frequent question:

What should you do for deformation of the silicone mold ?

It should deal apart according to the size of the products, In principle, the hardness of the silicone should be according to the size of the products. If the products features small size and detailed patterns on it, the soft silicone can be applicable which the shore A should be 15-20 for easy demoulding and not damage of the patterns. Other wise harder silicone should be needed for large size products, such as products with size 1meter will need harder silicone with 35-40 shore A , then no-deformation. If Large products but features detailed patterns then 30 shore A silicone will be workable.(The process should be a layer silicone add a layer fiber glass or cloth..).The outer of mold can be plaster, glass fiber reinforced plastic(unsaturated resin and fiber glass) to protect the products from deformation.

Need any help on silicone rubber, please feel free to contact Ms Kitty: 

Tel:86-755-89212369
Mob:86-18938867593
E-mail: hyjz(at)szrl(dot)net   
Skype:kity-467707861

You can also send me e-mail by scanning 2 Dimensional Bar Code below:

certification:

package: