E610 RTV Mold Making Silicone,liquid molds silicone rubber
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Basic Specification
| hs code | 39100000 |
|---|---|
| Supply Ability | 8 Ton per Day |
| application | Addition-cure type |
| Minimum Order Quantity | 200 Kilogram |
| any | color |
| Eco-Friendly | No |
| Test Report | SGS |
Detail Description
E610 RTV Mold Making Silicone (Addition-cure type)
Description :
RTV mold making addition silicone are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
Main application:
· Rapid prototyping （urethane casting/silicone tooling/vacuum casting）
· Food grade molding application
· PU resin casting
· General Mouldmaking
· Superior manual mold design
· Life casting
Main properties:
· almost nil shrinkage
· high chemical resistance to aggressive components of some types of resins
· good tear strength (this feature ensures higher resistance to wearing and shearing)
· high degree of precision in reproduction
· high dimensional stability over time and non-deformability
· high resistance to high temperatures and ageing (resit to -60-200℃)
· excellent non-stick effect
· environmental, odorless and nontoxic
P.S.: RTV addition silicone is widely used in rapid prototyping industry, typically used for making 20 to 40 pieces of functional prototypes out of broad range of polyurethanes and other polymers.silicone tooling is the fastest, most accurate, and least expensive way to create duplicates of a prototype part .Merchandise made in our addition silicone moulds have a high quality analogous to the final product, which makes them particularly advisable for fit and performance testing and advertising purposes.
RTV-2 Addition silicone rubber standard datasheet(25℃)
(The mixing ratio of part A and part B can be adjusted to 1:1or 10:1)
Silicone molding process instructions:
Rapid prototyping for instance,a master model that usually originates from stereolithography or selective laser.If you make silicone molds in pouring way,please follow below steps:
Notice:
All above addition silicone is forbidden to mix with organic compounds of condensation cure silicone rubber,otherwise, the silicone rubber will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure.
Storage ,shelf life and handling precautions:
1. Shelf life can be twelve(12) months when stored at 25℃ in tightly closed original packages.
2. Storage beyond the expired date does not necessarily mean that the product is no longer
usable. In this case , the properties required for the intended use must be checked for quality assurance reasons.
3,The curing agent may denature if the cap is left off after opening.Make sure to tightly seal the products prior to storage.Take particular care under conditions of high temperature or humidity.
4,If any of these products should come into contact with skin,wipe the exposed area with a cloth and then wash it thoroughly with soap.
5. This kind of product is non-dangerous product, which could be transported as general products.
Description :
RTV mold making addition silicone are generally named as two-part addition silicone rubber that vulcanises at room temperature.Part A is a flowable liquid, part B is the curing agent(platinum catalyst). It features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage. The mixing ratio between Part A and Part B can be 10:1 or 1:1.
Main application:
· Rapid prototyping （urethane casting/silicone tooling/vacuum casting）
· Food grade molding application
· PU resin casting
· General Mouldmaking
· Superior manual mold design
· Life casting
Main properties:
· almost nil shrinkage
· high chemical resistance to aggressive components of some types of resins
· good tear strength (this feature ensures higher resistance to wearing and shearing)
· high degree of precision in reproduction
· high dimensional stability over time and non-deformability
· high resistance to high temperatures and ageing (resit to -60-200℃)
· excellent non-stick effect
· environmental, odorless and nontoxic
P.S.: RTV addition silicone is widely used in rapid prototyping industry, typically used for making 20 to 40 pieces of functional prototypes out of broad range of polyurethanes and other polymers.silicone tooling is the fastest, most accurate, and least expensive way to create duplicates of a prototype part .Merchandise made in our addition silicone moulds have a high quality analogous to the final product, which makes them particularly advisable for fit and performance testing and advertising purposes.
RTV-2 Addition silicone rubber standard datasheet(25℃)
(The mixing ratio of part A and part B can be adjusted to 1:1or 10:1)
| Model | E610# |
| Appearance | White |
| Mixing Ratio | 1:1 |
| Operating time (Mins 25°C) | 5- 10 |
| Curing time (Hours 25°C) | 15 - 30 |
| Curing time (Mins 60°C) | 5- 10 |
| Hardness (A°) | 10±2 |
| Density ( g/cm 3 ) | 1.08 |
| Viscosity (CS) (Part A) | 4400 ± 500 |
| Viscosity (CS) (Part B) | 4600 ± 500 |
| Viscosity (CS) (After mixed) | 4500 ± 500 |
| Tensile-strength( kgf /cm2 ) | 600 ± 100 |
| Tear-strength (kgf /cm2 ) | 18± 2 |
| Elongation-break(%) | 500 ± 50 |
| Retractility(%) | ≤0.1 |
Silicone molding process instructions:
Rapid prototyping for instance,a master model that usually originates from stereolithography or selective laser.If you make silicone molds in pouring way,please follow below steps:
Notice:
All above addition silicone is forbidden to mix with organic compounds of condensation cure silicone rubber,otherwise, the silicone rubber will not cure, and also should not mix with organic compounds containing S, P, N as well as metallic salt of organic acids. It also will cause this product cure uncompletely or not cure.
Storage ,shelf life and handling precautions:
1. Shelf life can be twelve(12) months when stored at 25℃ in tightly closed original packages.
2. Storage beyond the expired date does not necessarily mean that the product is no longer
usable. In this case , the properties required for the intended use must be checked for quality assurance reasons.
3,The curing agent may denature if the cap is left off after opening.Make sure to tightly seal the products prior to storage.Take particular care under conditions of high temperature or humidity.
4,If any of these products should come into contact with skin,wipe the exposed area with a cloth and then wash it thoroughly with soap.
5. This kind of product is non-dangerous product, which could be transported as general products.
Need any help on silicone rubber, please feel free to contact Ms Maggie
Tel:86-755-89212369
Mob:86-13828847574
E-mail: maggie822014(at)gmail(dot)com
Skype:maggie.cao82
Additional Information
| Payment Terms | L/C, T/T, Western Union, Others |
|---|---|
| Minimum Order | 200KG |
| Lead Time / Delivery Time | 3 Day(s) |
| Sample Available | YES |
| Delivery Details | within three days after getting your payment |
| FOB Port | Shenzhen |
| Loading Info | FOB Shenzhen port by sea |
| Packing Info | 20kg and 200kg per drum |
| Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Middle East & South Asia, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |
Related Keywords
Related Keywords
You May Also Like
You May Also Like
-
liquid silicon casting for silicone jewelry molds
Silicone Rubber for artificial stone molding making
Addition Cure Silicone Rubber For Art Bronze Casting
Related ProductsProduct Categories-
Life Casting Silicone(148)
-
RTV Silicone Rubber(648)
-
Addition Cured mold making Silicone Rubber(298)
-
Silicone Rubber For Coating Textiles(56)
-
silicon oil(2)
-
Electronic Potting Silicone(93)
-
LSR ( Liquid silicone rubber for Injection molding(48)
-
liquid silicone for insole making(98)
-
HTV silicone(5)
-
Mould(9)
