addtion cure liquid silicone for concrete panel mould

addtion cure liquid silicon for concrete panel mould  

APPLICATIONS of addtion cure liquid silicon for concrete panel mould:

E630 addtion cure liquid silicon for concrete panel mould could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.

FEATURES of addtion cure liquid silicon for concrete panel mould:

Two-parts, flowable liquid silicon & curing agent.

Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.

Good tensile strength and tear strength,low shrinkage.

It gets cured at room temperature 25 0C within 5-7 hours.

An exceptional fluidity and good operability, easy to be demolded.

Suitable for pouring methods of operation for small sized molds making.

Datasheets of addtion cure liquid silicon for concrete panel mould

DESCRIPTION of addtion cure liquid silicon for concrete panel mould
platinum cured liquid silicone for stone veneer molds is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.

OPERRATING INSTRUCTION of addtion cure liquid silicon for concrete panel mould:

1.Stir part A and part B with right mixing ratio

evenly. And get the mixture for vacuum-

pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame.

After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE of addtion cure liquid silicon for concrete panel mould:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE of addtion cure liquid silicon for concrete panel mould

Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.

Need any help on silicone rubber, please feel free to contact Ms Crystal:

Tel:86-755-89212369
Mob:86-18938867509
E-mail: hyxd(at)szrl(dot)net   
Skype:shisi1991