10W LED downlight 800Lm,120Deg,80Ra,CE&ROHS

Dimmable 800Lm 10W LED downlight
Skype:sukie0820
Msn:sukie0820@hotmail.com

Specifications

Power consumption 10W

Input voltage AC 220V/50-60Hz

Viewing angle 120Deg.

Description: 4inch

Housing material: Aluminium alloy

Color temperature 2800-7200K

Luminous flux 800Lm

Cut size:128mm

CRI: ≥70

Power factor: ≥0.8

General Characteristics

GeneralInformation

Electrical/Optical Characteristics

Outline Dimension

Notes:

1. All dimensions are in millimeters.

2. Tolerance is ±0.25mm unless otherwise specified

3. Specifications are subject to change ,no out notice

.

Certification

Factory Image  

Notes:

• The working voltage for LED downlight is AC100V-240V. Please make sure the working voltage is AC100-240V before you connected the bulbs to the power supply. Connection to higher voltage will result in permanent damage.
• According to the required amount of bulbs estimated firstly and rated voltage of every single bulb, calculate the total power and design the distribution program,.
• The power supply for the bulb is AC100V-240V, prohibit any contact to the metal part of bulb base after connected to the power supply to avoid the electric shock .
• Please check whether any bulbs damage caused by delivery or not before you unpacked and prepare to use the bulbs. If yes, please don’t use it and inform the supplier. The products can only be used in good condition.
• Please follow the constructions and cautions on the leaflet so as to ensure the safe usage and the good condition of products. Any damage or defect caused by failure to comply with the leaflet is out of the supplier’s responsibility.
• Please don’t connect the bulbs to the power supply promptly when the environmental temperature is surging because the origin generated heat stream can spoil the products. You are strongly recommended to do the connection after the product is in room temperature.
• Before installation, please make sure that the installation location can fully support the product. The products should be installed in plat place resisting to shock, swing, and fire.
• Because outer covering temperature can amount to 50°C, keep the bulbs any from these heat-sensitive equipments. LED product is sensitive to environmental temperature and its life will be greatly shortened whenever the working temperature is over50°C. So please keep the product away from the heat origins and keep it working in a venting condition to ensure the proper environmental temperature. Product’s life is longer under 25°C working temperature