FY Lighting 50000hrs UL CUL Listed FREEZER LED Lighting 60cm to 240cm

FY Lighting 50000hrs UL CUL Listed FREEZER LED Lighting 60cm to 240cm

1.347V T8 Tube Lights
2.5-year warranty
3.epistar chip,96-120lm/w
4.punctual delivery time
5.ul cul csa
6.OEM/ODM both ok for us

For FY TUBES T8 Lamp:
120~277V tube is UL/cUl approval   
UL No.:E341042 for tube
UL No.:E349847 for tube and driver
UL No.:E353331 for driver
you can check here:www.ul.com/database for details.
277V~347V tube is CSA approval    
CSA Master Contract:252050  
you can check here:https://directories.csa-international.org/
Also VDE CE RoHS SAA C-Tick certification is ok for us too
 
2014 NEW FRESH ITEMS LED TUBES LIGHTING for you choosing:
1.2pcs tube with one external driver.(4pcs tube with one external driver both ok)
2.emergency tube, use the LI battary to offer power. 1 hour, 2hours and some longer last time can be ok, we all can design for you.
3.emergency tube+voice&PIR sensor,,
not only can replace the emergency fluroscent tube
but also can have tube with sensor\'s function.
widely use in the parking place.
4.tube with voice&PIR sensor,
when people around 5-8m horizontal  120 °vertical 150 °,
or the voice up to 56±2db, it will light on.
5.tube compatible electronic ballast
6.led u tube 2ft
7.dimming tube
8.led fridge tube waterproof ip65：the beam angle can >320°
9.normal t8 tube ul cul csa 347V certified, internal/external driver both ok.

Details advantage for FY tube led lighting:
1.super optical benefits:
High brightness 120LM/w,80Ra,PFC>0.95,THD<10%, and high illumination up to 70lux/3m height.
2.great material to make sure excellent heat dissipation performance
our own mould: good looking outer design, deep strip ,easy for heat releasing Aluminum board and aluminum housing guarantee double heat releasing to avoid light depreciation and prolong lifespan>50.000hours . 
3. 100% safe driver design: isolated driver (internal and external available).
4.  LM80 test report for Epistar 3528 led chip burn-in in 6000hrs , LM79 parameter test report for led tube
5. Strict quality control:72hrs burn-in test before shipment,low failure rate within 3‰. A series of testing like shaking test, low and high temperature test (-25°C~ 65°C),drop test from the height of 90mm in 8directions ,hipot test 1500V for 1 min and so on.

1. 24hrs for burn-in light source

2. 24hrs-48hrs for burn-in drivers and shorts

3. 48hrs-72hrs for burn-in leakage

4. 48hrs-72hrs for burn-in IC,compacitor and resistor

6. 5 years warranty , under the warranty ,less than35% depreciation of light output compared with initial EXW lumens,  we are responsible for our clients