Chinese CPU 224 AC DC with Relay low cost Cpu equvalent of Siemens CPU

Basic Specification

Automation Component	plc manufacturer
programmable logic controller	Siemens PLC
Temperature controller	Siemens CPU
HMI	Touch Panel
Chinese PLC	Industrial Controller

Detail Description

Chinese CPU 224 AC DC with Relay low cost Cpu

UniMAT PLC CPU224
	Characteristic: ·Strong capabilities of high-speed computering and data processing ·Program memory:50KB ·Boolean execution speed: 0.08µs per instruction · Port:2 RS-485 ports, within1standard PPI port
Model	CPU224 DC/DC/DC	CPU224 AC/DC/Relay
Physical characteristic
Dimensions(W x H x D)(mm)	140×80×62	140×80×62
Power consume	7W	10W
Memory
Program memory size
With run mode edit	25K bytes	25K bytes
Without run mode edit	50K bytes	50K bytes
Data memory	20408bytes	20408bytes
I/O
Local digital inputs	14 inputs	14 inputs
Local digital outputs	10 outputs	10 outputs
Digital I/O image size	256(128 inputs/128 outputs)	256(128 inputs/128 outputs)
Analog I/O image size	64(32 inputs/32 outputs)	64(32 inputs/32 outputs)
expansion modules allowed (Max)	7 modules	7 modules
intelligent modules allowed (Max)	7 modules	7 modules
Pulse catch inputs	14	14
High-speed counters	6 counters total	6 counters total
Single phase	6 at 30KHz	6 at 30KHz
Two phase	4 at 20KHz	4 at 20KHz
Pulse outputs	2 at 30 KHz(DC outputs only)	-
General
Timer	Total number:256(1ms:4;10ms:16;100ms:236)
Counters	256	256
Internal memory bits stored on power down	256	256
Time interrupts	2 with1ms resolution	2 with1ms resolution
Edge interrupts	4 up and/or 4 down	4 up and/or 4 down
Analog adjustment	2 with 8 bit resolution	2 with 8 bit resolution
Boolean execution speed	0.08µs per instruction	0.08µs per instruction
Real Time Clock	Built-in	Built-in
Communications Built-in
Ports	2 RS-485 ports, within1 standard PPI port	2 RS-485 ports, within1standard PPI port
PPI Baud Rates	9.6,19.2 and 187.5 kbaud	9.6,19.2 and 187.5 kbaud
Freeport Baud Rates	1.2kbaud to 115.2kbaud	1.2kbaud to 115.2kbps
Max. cable length per segment	With isolated repeater:1000 m up to 187.5kbaud, 1200 m up to 38.4kbaud Without isolated repeater: 50 m
Max. number of stations	32 per segment, 126 per network
Max. number of masters	32	32
Peer to peer(PPI Master Mode)	Yes	Yes
Power
Input voltage	20.4 to 28.8 V DC	85 to 264 V AC(47 to 63Hz)
Input current	110mA while CPU only at 24 V DC	60/30mA while CPU only at 120/240V AC
700mA while Max. load at 24 V DC	200/100Ma while Max. load at 120/240V AC
Inrush current	12A at 28.8 V DC	20A at 264 V AC
Isolation(field to logic)	Not isolated	1500 V AC
Hold up time(loss of power)	1s at 24 V DC	1s at 120/240 V AC
Sensor voltage	L+ minus 5 V	20.4 to 28.8 V DC
Current limit	1.5A peak,thermal limit non-destructive	1.5A peak,thermal limit non-destructive
Ripple noise (sensor to logic)	Derived from input power	Less than 1 V peak-to-peak
Isolation (sensor to logic)	Not isolated	Not isolated
CPU Digital Input Specifications
Built-in digital input	14 inputs	14 inputs
Input type	PNP/NPN	PNP/NPN
Rated voltage	24 V DC at 4mA	24 V DC at 4mA
Max. continuous permissible voltage	30 V DC	30V DC
Surge voltage	35 V DC for 0.5s	35 V DC,0.5s
Logic “1” voltage range	15 to 30 V DC	15 to 30 V DC
Logic “0” voltage range	0 to 5 V DC	0 to 5 V DC
Input delay	Selectable (0.2 to12.8ms)	Selectable (0.2 to 12.8ms)
Connection of 2-wire proximity sensor (Bero) Premissible leakage current (Max.)	1mA	1mA
Isolation (field to logic)	Yes	Yes
Optical galvanic	500 V AC for 1minute	500 V AC for 1minute
Isolation groups	Refer to Wiring diagram	Refer to Wiring diagram
High Speed Counter (HSC) input rate
HSC logic level 1(15 TO 30 VDC)	20K Hz (Single phase), 10K Hz (Tow phase)
HSC logic level 1(15 TO 26 VDC)	30K Hz (Single phase), 20K Hz (Tow phase),
Inputs on simultaneously	all	all
Cable length Max.
Shielded	500m normal inputs, 50m HSC inputs
unshielded	300m normal inputs
CPU Digital Output Specifications
Built-in outputs	10 outputs	10 outputs
Output type	Solid State-MOSFET(Sourcing)	Dry contact
Rated voltage	24 V DC	24 V DC or 250 V AC
Voltage range	20.4 to 28.8 V DC	5 to 30 V DC or 5 to 250 V AC
Surge current (Max.)	8A for 100ms	5A for 4s at 10% duty cycle
Logic “1” (Min)	20 V DC,at maximum current	-
Logic “0” (Max)	0.1 V DC with 10KΩ load	-
Rated current per point(Max.)	0.75A	2.0A
Rated current per common（Max）	6A	10A
Leakage current (Max)	10µA	-
Lamp load (Max)	5W	30W DC;200W AC
Inductive clamp voltage	L+ minus 48 V DC, 1w dissipation
On State resistance (contact)	0.3Ω Typical(0.6Ω max.)	0.2Ω(max. when new)
Isolation
Optical (galvanic, field to logic)	500 VAC for 1 minute	-
logic to contact	-	1500 V AC,1minute
Resistance (logic to contact)	-	100MΩ
Isolation groups	Refer to wiring diagram	Refer to wiring diagram
Delay(Max)
Off to on	2µs(Q0.0,Q0.1), 15µs(others)	-
On to off	10µs(Q0.0,Q0.1), 130µs(others)	-
Switching	-	10ms
Pulse frequency (Max.)	20KHz (Q0.0 and Q0.1)	1Hz
Lifetime mechanical cycles	-	10,000,000 (no load)
Lifetime contacts	-	100,000 (rated load)
Outputs on simultaneously	All at 60℃(horizontal)	All at 60℃ (horizontal)
All at 50℃ (Vertical)	All at 50℃ (Vertical)
Connecting two outputs in parallel	Yes, only outputs in same group	No
Cable Length (Shielded)	500m	500m
Cable Length (unshielded)	150m	150m
Order number	UN 214-1AD23-0XB0	UN 214-1BD23-0XB0

Additional Information

Payment Terms	T/T, Western Union, Money Order, Paypal
Minimum Order	1
Lead Time / Delivery Time	3 Day(s)
Sample Available	YES
Delivery Details	DHL,FedEX,TNT,UPSDoor to door services
FOB Port	Shenzhen
Loading Info	FOB
Packing Info	New Carton packing
Target Market(s)	Africa(except Middle East), Eastern Europe, Hong Kong/ Macao/ Taiwan, Japan & Korea, Latin America, Mainland China, Middle East, North America, Northern Europe, Oceania, Central & Southern Asia, Southeast Asia, Western & Southern Europe