
Portable solar charger, used for: Mobile phone, iphone, ipod
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Product Description
Product Description
Basic Specification
solar panel input | 6V/220mA |
---|---|
battery type | Li-Pol |
output | 5V/1000mA |
capacity | 3000mAh/11.1Wh |
input | mini USB 5V/1000mA |
Output Voltage | 5 |
Hole Digits | 2 |
Type | Solar |
Charge Current | 1000mA |
Detail Description
Portable solar charger, used for: Mobile phone, iphone, ipod
1. By solar: put the device under the sunshine or in the light strong enough, the solar charger could be charged by solar. it would take 8 hours to fully charge the charger.
2. By DC: use the usb cable attached to charge the charger.
How to know the remain power
Press the button, LED lights will turn on to show the remain power.
Portable solar charger, used for: Mobile phone, iphone, ipod
How to use the charger to charge your devices
Caution:
1.Pls read these instructions carefully as incorrect use of Li-polymer batteries may lead to dangers such as overheating,fuming,catching fire.
2. Please charger the mobile charger completely before the first time using it.
3. Before charging the electric device, please confirm the voltage of the electric device. Make sure the voltage of your device ranges between 4.5V to 5.5V.
4. Don’t drop, knock, disassemble or attempt to repair the charger by yourself.
5. Don’t immerse the charger in water or make it wet.
6. Don’t expose the charger to a heat source as fire or heater,
7. Keep out of reach of children.
8. Don’t use in the presence of flammable gas.
Feature:
1. High capacity: With high capacity Li-polymer batteries.
2. Long life: rechargeable Li-polymer batteries, up to more than 500 circles, the power can still remain 80% after 3 month.
3. High security: protection for overcharge, over discharge, overloading, and short circuit.
Spec.:
Battery type :solar battery Li-polymer battery
Capacity: 3000mAh/11WH
Rated input: 5V 1000mA
Rated output: 5V 1000mA
Solar panel output: 5V,250mA
Dimension: 100*50*12(mm)
Portable solar charger, used for: Mobile phone, iphone, ipod
Weight: 200g
1. High capacity: With high capacity Li-polymer batteries.
2. Long life: rechargeable Li-polymer batteries, up to more than 500 circles, the power can still remain 80% after 3 month.
3. High security: protection for overcharge, over discharge, overloading, and short circuit.
Spec.:
Battery type :solar battery Li-polymer battery
Capacity: 3000mAh/11WH
Rated input: 5V 1000mA
Rated output: 5V 1000mA
Solar panel output: 5V,250mA
Dimension: 100*50*12(mm)
Portable solar charger, used for: Mobile phone, iphone, ipod
Weight: 200g
Portable solar charger, used for: Mobile phone, MP3/MP4, PSP, NDS, iPod, iPhone
Portable solar charger, used for: Mobile phone, iphone, ipod
1. By solar: put the device under the sunshine or in the light strong enough, the solar charger could be charged by solar. it would take 8 hours to fully charge the charger.
2. By DC: use the usb cable attached to charge the charger.
How to know the remain power
Press the button, LED lights will turn on to show the remain power.
LED Light (●ON ○OFF) | Capacity |
●●●● | 75%-100% |
●●●○ | 50%-75% |
●●○○ | 25%-50% |
●○○○ | 0%-25% |
○○○○ | 0% |
Portable solar charger, used for: Mobile phone, iphone, ipod
How to use the charger to charge your devices
1. Connect the cable to the charger.
2. Choose correct connector to connect the mobile phone or other devices.
3. When the connection is OK, keep pressing the button for 3 seconds, the LED light on the power bank will turn on, means it’s charging your device.
4. Any device of 5V can be recharged anywhere by the powerbank: iPhone, iPod, mobile phone, Bluetooth headset, MP3/MP4, video games consoles...
5. When the device is fully charged, disconnect it with the powerbank, keep pressing the button for 3 seconds, and the LED lights will turn off.
Caution:
1.Pls read these instructions carefully as incorrect use of Li-polymer batteries may lead to dangers such as overheating,fuming,catching fire.
2. Please charger the mobile charger completely before the first time using it.
3. Before charging the electric device, please confirm the voltage of the electric device. Make sure the voltage of your device ranges between 4.5V to 5.5V.
4. Don’t drop, knock, disassemble or attempt to repair the charger by yourself.
5. Don’t immerse the charger in water or make it wet.
6. Don’t expose the charger to a heat source as fire or heater,
7. Keep out of reach of children.
8. Don’t use in the presence of flammable gas.
Additional Information
Payment Terms | L/C, Western Union, Money Order, Paypal |
---|---|
Minimum Order | 300pcs |
Lead Time / Delivery Time | 18 Day(s) |
Sample Available | YES |
Delivery Details | according to contact detail |
FOB Port | Shenzhen |
Loading Info | according to contact detail |
Packing Info | according to contact detail |
Target Market(s) | North America, Oceania, Southeast Asia, Eastern Europe, Africa(except Middle East), Hong Kong/ Macao/ Taiwan, Latin America, Japan & Korea, Mainland China, Western & Southern Europe, Northern Europe, Central & Southern Asia, Middle East |
Related Keywords
Related Keywords