IP65 Waterproof LED Tube Light,Professional Outside LED Tube Light

600mm,900mm,1200mm,1500mm---2400mm T8 LED outside led Tube Light,IP65 waterproof LED tube light with Certification: CE, RoHS and FCC

Outside LED Tube Light can work safely in explosive and flammable environments. Full plastic explosion-proof fluorescent lamps comprise bodies manufactured in glass fiber reinforced polyester and transparent parts manufactured in polycarbonate. They have good protection ability from various chemical matters in factories because of high stability and mechanical strength. The material this T8 led tube light could prevent from being corroded effectively.

Outside LED Tube Light specification:
Lighting name	Outside LED Tube Light
Total power consumption	11W
LED consumption	9W
Input voltage	AC90-250V, 50/60Hz
Power supply	Built-in constant current
Lighting source	144pcs low power 3528 LED
Dimension	675mmx112mmx100mm
Material	Aluminum+PC cover (transparent, striped, frosted)
Lamp holder	G13
Luminous flux	720lm±10%
Luminous efficiency	70–80lm/W
Color temperature	2700-4500K, 4500-6500K, 6500-9000K
Viewing angle	120 degrees
CRI	Ra>70
Working temperature	-20〜40℃
Environment humidity	<90%
Life-span	50,000 hours
Certification	CE, RoHS and FCC
Warranty	2 years

Features of Outside LED Tube Light
1 Explosion-proof, corrosion-proof and dust-proof.
2 High quality light source. The attenuation of SMD LED light source is less than 3% by 3000hrs aging test under temperature 50 degrees celsius, high luminous efficiency of single LED.
3 Advanced constant current driver with short circuit protection, open circuit protection, overload protection, etc.
4 Superior raw materials. Made of high quality aluminum material, which helps to the heat dissipation and turn on delicate appearance.
5 Professional thermal management. Adopts aluminum substrate tightly connected with aluminum housing by insulated glue and greatly reduce the heat dissipation.
6 High temperature resistant housing for safety.
7 Superior PC cover for explosion proof purpose. Wide range voltage input.
8 No UV or infra-red radiation, no mercury or lead, eco-friendly, no danger of broken glass.
9 Low energy consumption, saves 60% power comparing conventional lights.
10 No need for starter and ballasts, instant soft-start, no speckle, no flickering, no humming, no buzzing, no RF interference.
11 Easy to install, replace T8/T10 conventional fluorescent light directly low maintenance cost. Lower costs by reducing re-lamp frequency, especially in difficult to reach areas that require lifts.
12 Long life-span: life time 30,000hrs, 6 times longer than traditional fluorescent tubes.
13 Different length available: 60cm/90cm/120cm/150cm/180cm/240cm.
14 Strict quality control, lighting aging for 72 hours and complete inspection before shipping.
15 Solid-state, high shock resistant, strong packaging, convenient to transportation.
16 Strong lifetime, start-up quick, It is convenience to repairing and fixing, reliability and so on.

Attentions
1 Before installation, check whether the power is suitable.The tube must work under the right voltage according to the specification.
2 Cut off the power first for safety.
3 Don’t take the tube apart.
4 Recommend indoor use.
5 Please use it in a ventilation environment and keep it from water.
6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit!

Application
Lighting for explosive environments. This product is applicable to fixed illumination in inflammable and explosive places, such as the petro-chemical devices, oil platforms, gas stations, oil pump rooms and transfer stations. Used wherever there is danger of an explosion caused by flammable gases, vapors or dust mixing with air or oxygen.
Locations for usage are areas where there is a risk of explosion, including chemical facilities, fire departments, petroleum. departments, drugs manufacture, coal mine, the war industry.