52W 1500mm T8 LED Tube, Explosionproof Light

52W 1500mm Explosion-proof T8 LED Tube Light

The light can work safely in explosive and flammable environments. Full plastic explosion-proof fluorescent lamps comprise bodies manufactured in glass fiber reinforced polyester and transparent parts manufactured in polycarbonate. They have good protection ability from various chemical matters in factories because of high stability and mechanical strength. The material this lamp used can prevent from being corroded effectively.

Specifications
Lighting name	1,500mm 45W Explosion-proof T8 LED Tube Light
Total power consumption	52W
Input voltage	AC90-250V, 50/60Hz
Power supply	Built-in constant current
Lighting source	720pcs (2*360pcs) low power 3528 LED
Dimension	1,578mm*166mm*100mm
Material	Aluminum+PC cover (transparent, striped, frosted)
Lamp holder	G13
Luminous flux	3,600lm±10%
Luminous efficiency	70–80lm/W
Color temperature	2700-4500K, 4500-6500K, 6500-9000K
Viewing angle	120 degrees
CRI	Ra>70
Working temperature	-20〜40℃
Environment humidity	<90%
Life-span	50,000 hours
Certification	CE, RoHS and FCC
Warranty	2 years

Features
1 Explosion-proof, corrosion-proof and dust-proof.
2 High quality light source. The attenuation of SMD LED light source is less than 3% by 3000hrs aging test under temperature 50 degrees celsius, high luminous efficiency of single LED.
3 Advanced constant current driver with short circuit protection, open circuit protection, overload protection, etc.
4 Superior raw materials. Made of high quality aluminum material, which helps to the heat dissipation and turn on delicate appearance
5 Professional thermal management. Adopts aluminum substrate tightly connected with aluminum housing by insulated glue and greatly reduce the heat dissipation
6 High temperature resistant housing for safety
7 Superior PC cover for explosion proof purpose. Wide range voltage input.
8 No UV or infra-red radiation, no mercury or lead, eco-friendly, no danger of broken glass
9 Low energy consumption, saves 60% power comparing conventional lights
10 No need for starter and ballasts, instant soft-start, no speckle, no flickering, no humming, no buzzing, no RF interference
11 Easy to install, replace T8/T10 conventional fluorescent light directly low maintenance cost. Lower costs by reducing re-lamp frequency, especially in difficult to reach areas that require lifts
12 Long life-span: life time 30,000hrs, 6 times longer than traditional fluorescent tubes
13 Different length available: 60cm/90cm/120cm/150cm/180cm/240cm
14 Strict quality control, lighting aging for 72 hours and complete inspection before shipping
15 Solid-state, high shock resistant, strong packaging, convenient to transportation
16 Strong lifetime, start-up quick, It is convenience to repairing and fixing, reliability and so on.

Attentions
1 Before installation, check whether the power is suitable.The tube must work under the right voltage according to the specification.
2 Cut off the power first for safety
3 Don’t take the tube apart
4 Recommend indoor use
5 Please use it in a ventilation environment and keep it from water.
6 DO NOT connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative), you will create a short circuit!

Application
Lighting for explosive environments. This product is applicable to fixed illumination in inflammable and explosive places, such as the petro-chemical devices, oil platforms, gas stations, oil pump rooms and transfer stations. Used wherever there is danger of an explosion caused by flammable gases, vapors or dust mixing with air or oxygen.